This simple tool is compatible with the PatchLock RJ45 Patch Leads and used to remove the leads from RJ45 Sockets

The Connectix Cable Stripper is the ideal way of stripping data cables. Its fully encapsulated blades ensure a precisely controlled and constant cutting depth, without the risk of nicking individual wires or fingers. And with only one rotation of the stripper, it removes cable outer jackets of all common shielded and unshielded data cables up to...

The Connectix Category 6 2020 Series Patch Panel is an alternative to the Standard Category 6 Panel. It offers the same Cat 6 performance as the standard panel but has been designed to present the cable termination IDCs horizontally on a tray at the rear of the panel, making termination and cable management easier. Category 6 panels provide...

The Connectix Shuttered Keystone LJ6C Fascia is compatible with Cat 5e, Cat 6 and Cat 6a keystone modules. One fascia is required for each module used in a faceplate. They have been designed to be used with most Euro Module Keystones. Quick and easy to install Easy to use reignition label Snap-fit to terminate Suitable for all standard Keystone...

1 Pot = 100 plugs1 box = 20 PotsOur 'Easy' range of RJ45 pass through plugs are made from high quality engineered plastic with brass gold over nickel plating contacts. For best results use with the 'Easy crimp tool allows you to cut, strip and terminate a plug all in one. The Crimp tool Trims the excess wires as it crimps Features &...

Single gang metal faceplate loaded with one Cat 6 module Fit perfectly onto standard size single gang back boxes Ideal for installing into situations where matching the surrounding décor is important. Module Details Category 6 modules provide the performance needed for present and next generation data communications networks and...

Cable Dump Panels provide Ideal cable management keeping network cables tidy whilst allowing them to be fed through to the back of the network cabinet.

These 19" cabinet blanking panels are ideal for keeping your cabinet neat, tidy and working efficiently by blanking off any unused space. When used in an environment with servers, they will help stop front to back air movement within the cabinet, protecting your servers from warm air from the rear of the cabinet.

Doublegang metal faceplate loaded with four Cat 6 modules Fit perfectly onto standard size double gang back boxes Ideal for installing into situations where matching the surrounding décor is important. Module Details Category 6 modules provide the performance needed for present and next generation data communications networks and...

Optional Cable management bar for use with Elite Patch Panels (009-001-009-09 and 009-001-009-07) Picture shows Elite Panel with management bar fitted 

Brush Strip Panels are used to allow the passage of patch leads from the front of a cabinet to the rear whilst maintaining a neat appearance and reducing back to front air flow.

Punchdown tools are used to terminate cable with IDC connection blocks found on Patch Panels and Data Outlets.