• Faceplate, preloaded with Cat5e Modules - available with...

    From £1.93 Ex VAT.

    Pre Loaded Faceplates (singlegang for 1 or 2 modules, doublegang for 4 modules) consist of either one, two or four euromod size Cat5e RJ45 modules and a faceplate, with blanks where appropriate. Details: Features: Cat5e Compliant Built in slide label system Suitable for Gigabit Ethernet applications Industry standard IDCsModule Details: The CCS Cat5e Module is designed to provide one of the shallowest wall outlets on the market. They are the ideal solution wherever back-box depth is a problem. The attractive high gloss finish...

    £1.93
    View Range

  • 24 Port Cat5e UTP RJ45 Patch Panel

    From £19.43 Ex VAT.

    These value Cat5e Patch Panels, provide a cost effective solution with all the performance and features you would expect from a much more expensive product. The panels are Independently verified to exceed all the standards for cat5e. Each port is numbered for ease of indentification. Features: Suitable for Gigabit Ethernet applications Individual colour coded saddles allow quick and accurate terminations Top quality sockets Fully QA tested

    £19.43
    View Range

  • Right Angled Cat6 RJ45 Patch Panel

    From £29.33 Ex VAT.

    The Connectix 2020 Series Patch Panel is an alternative to the Category 6 High Density Panel. It offers the same Category 6 performance as the standard panel but has been designed to present the cable termination IDCs horizontally on a tray at the rear , making termination and cable management easier. Category 6 High Density 24 way panels achieve optimum transmission performances by incorporating the highest quality components and innovative on-board compensation techniques. This panels offer extended PowerSum characteristics and exceeds...

    £29.33
    View Range

  • With 48 Cat5e UTP RJ45 Ports in 2u

    From £39.90 Ex VAT.

    These value Cat5e Patch Panels, provide a cost effective solution with all the performance and features you would expect from a much more expensive product. The panels are Independently verified to exceed all the standards for cat5e. Each port is numbered for ease of indentification.

    £39.90
    View Range

  • Thru-Coupler Patch Panel with 24 ports in 1u of space

    From £44.71 Ex VAT.

    These through coupler panels present a standard RJ45 connector to both the front and rear of the panel, and are ideal for temporary or emergency cabling installations as they can be installed in a matter of minutes. They can also be installed as equipment link panels. Choice of port density Quick and simple to install Category 5e compliant Lifetime product warranty 25 year system warranty available

    £44.71
    View Range

  • Krone style tool for punching down cable on IDCs

    From £10.40 Ex VAT.

    Punchdown tools are used to terminate cable with IDC connection blocks found on Patch Panels and Data Outlets.

    £10.40
    View Range

  • 19" Cable Management Bar with Horizontal and Vertical...

    From £5.81 Ex VAT.

    19" Cable Tidy, suitable for mounting on all 19" data cabinets and server racks, allowing cables to be neatly routed. The vertical cable rings create an ideal bend radius for the cables and greatly assists keeping the rack neat. Radiused edges Black finish

    £5.81
    View Range

  • EuroMod size (25x50mm) Low Profile (21mm Deep) Cat5e RJ45...

    From £1.26 Ex VAT.

    CCS Cat5e Compact Modules are designed to provide one of the shallowest wall outlets on the market. They are the ideal  solution wherever back-box depth is a problem. The attractive high gloss finish and easy to use labelling system are identical to all other CCS Modules, making them interchangeable in most applications. Cat6e Compact Modules can be fitted into single or dual gang faceplates and can be combined with quarter blanks and/or voice modules to provide the required configuration. The modules offer extended PowerSum...

    £1.26
    View Range

  • Faceplate, preloaded with Cat6 Modules - available with...

    From £2.42 Ex VAT.

    Pre Loaded Faceplates (singlegang for 1 or 2 modules, doublegang for 4 modules) consist of either one or two euromod size modules and a faceplate, with blanks where appropriate. Supplied in a sealed bag these plates save time and money by reducing on site installation and assembly time. Details: Features: Cat6 Compliant Built in slide label system Lifetime product warranty 25 year system warrantyModule Details: CCS Cat6 RJ45 modules are designed to provide one of the shallowest wall outlets on the market. They are the ideal...

    £2.42
    View Range

  • Metal Faceplates pre-loaded with Cat6 UTP Modules...

    From £6.65 Ex VAT.

    Single gang metal faceplate loaded with one or two Cat6 Modules Double gang metal faceplate loaded with 4 Cat6 Modules Fit perfectly onto standard size single gang back boxes Ideal for installing into situations where matching the surrounding décor is important. Module DetailsThe Cat6 compact module is designed to provide one of the shallowest outlets on the market. They are the ideal solution wherever back box depth is a problem. Installation is made easy with individual colour codes and the use of industry standard IDC’s. Cat6 modules...

    £6.65
    View Range

  • Cat5e UTP PVC Solid Cable Available on a 100mt Reel

    From £28.57 Ex VAT.

    CCS Cat5e UTP Cable is designed for high speed LANs including Gigabit Ethernet applications. When used with CCS Cat5e patch panels and modules it gives the exceptional performance required for transmission over all four pairs. The cable is supplied in easy to use 100mt Reels. Cat5e UTP PVC Cable Details: Features: Suitable for Gigabit Ethernet applications PVC outer sheath Supplied metre marked Pure copper cores Excellent performance exceeding ANSI/TIA Cat5e specifications

    £28.57
    View Range