The Connectix Shuttered Keystone LJ6C Fascia is compatible with Cat 5e, Cat 6 and Cat 6a keystone modules. One fascia is required for each module used in a faceplate. They have been designed to be used with most Euro Module Keystones. Quick and easy to install Easy to use reignition label Snap-fit to terminate Suitable for all standard Keystone...

The 'Easy' RJ45 Crimp tool works perfectly with the 'Easy' Cat6 UTP & FTP Pass Through Plugs.With its added cutting function, this crimp tool trims off the excess wires as it crimps the RJ45 plug.- For use with RJ45 Pass through plugs- Can be used to cut outersheath of cableSee below for the 4 step 'Easy' Instructions 1 Remove approximately...

Brush Strip Panels are used to allow the passage of patch leads from the front of a cabinet to the rear whilst maintaining a neat appearance and reducing front to back air flow.

UK Power Lead Y Splitter Cable to 2x IEC C13 Female connectors, ideal for powering to devices with one outlet. Features Fully Moulded and Fused Colour: Black and Hanked Plug to Y 2m Y Lead 0.5m

CCS Cat 5e UTP Patch Cable is designed highly flexible and designed for terminating on RJ45 connectors for making RJ45 Patch Leads. When used with CCS Cat 5e Plugs it gives the exceptional performance required for transmission over all four pairs. The cable is supplied in easy to use 305m boxes and is available in Grey, Red, Blue, Green, White,...

Category 6 unshielded twisted pair cable is designed for use in next generation data communications networks, and will comfortably support all present applications including 2.5Gbp-5Gbp Ethernet.  Connectix Category 6 U/UTP Solid Cable offers the performance characteristics required by the ever present Category 6 Standard. When used in...

The Connectix 2020 Series FTP Patch Panel is an alternative to the Standard Enhanced Category 5e FTP Panel. It offers the same Enhanced Category 5e performance as the standard panel but has been designed to present the cable termination IDCs horizontally on a tray at the rear of the panel, making termination and cable management easier. All...

Connectix Through Coupler Panels offer Enhanced Category 5e system performance, and feature 24 ports in 1u. They offer the perfect solution when a panel mounted high performance, high density plug-to-plug connection is required. Designed to match the other panels in the Connectix range the Coupler Panels have RJ45 sockets front and rear to...

Connectix Category 6a F/FTP Cable has been designed to provide the exceptional performance required to support extremely high speed applications, including 10-Gigabit Ethernet.The cable consists of 4 screened pairs, drain wire and additional outer foil. It helps to alleviate the problems of NEXT and alien crosstalk. The sheath is a Low Smoke...

1 Pot = 100 plugs1 box = 20 PotsOur 'Easy' range of RJ45 pass through plugs are made from high quality engineered plastic with brass gold over nickel plating contacts. For best results use with the 'Easy crimp tool allows you to cut, strip and terminate a plug all in one. The Crimp tool Trims the excess wires as it crimps Features &...

Connectix Cabling System Long RJ45 Patch leads are available in lengths from 30mt to 90mt. These RJ45 leads are made to order using high quality Cat6 connectors Cat6 UTP Cable. Each patch cable is individually tested and bagged to ensure quality and performance. Features: Each lead is individually bagged & QA tested  Plugs conform to ISO8877