The 'Easy' RJ45 Crimp tool works perfectly with the 'Easy' Cat6 UTP & FTP Pass Through Plugs.With its added cutting function, this crimp tool trims off the excess wires as it crimps the RJ45 plug.- For use with RJ45 Pass through plugs- Can be used to cut outersheath of cableSee below for the 4 step 'Easy' Instructions 1 Remove approximately...

Brush Strip Panels are used to allow the passage of patch leads from the front of a cabinet to the rear whilst maintaining a neat appearance and reducing front to back air flow.

IDC Cat6 Inline Couplers provide an effective means of eliminating connection problems that may be  encountered during voice and data installation (for example cable cut too short). It is also used when it becomes necessary to extend a cable run to a new location. Four pair UTP Cat6 cable can be joined together without compromising the Cat6...

Category 6 F/UTP twisted pair cable is designed for use in next generation data communications networks, and will comfortably support all present applications including Gigabit Ethernet. Connectix Category 6 F/UTP Solid Cable offers the performance characteristics required by the ever present Category 6 Standard. When used in conjunction with...

CCS Cat6 FTP Shielded Patch Leads are designed to exceed the performance requirements of the Category 6 Specification. The Cat6 Patch Leads are made from Cat6 stranded cable and are terminated using high performance modular plugs. The fully shielded patch leads increase signal isolation and prevent contaminant noise from entering a cabling...

Pre Loaded Faceplates (singlegang for 1 or 2 modules, doublegang for 4 modules) consist of either one or two euromod size modules and a faceplate, with blanks where appropriate. Supplied in a sealed bag these plates save time and money by reducing on site installation and assembly time. Details: Features: Cat6 Compliant Built in slide label...

Category 6 high density patch panels provide the performance needed for present and next generation data communications networks and applications, including Gigabit Ethernet. The high density format is ideal where cabinet space is at a premium. Available in a 2u 48 port format, these Category 6 high density panels achieve optimum transmission...

Using our in-house cable assembly facility, we are able to manufacture virtually any type of Cat 6 UTP RJ45 Patch Leads to your exact specification. Each RJ45 lead is individually tested to ensure quality and performance. All leads are made with high quality 100% copper stranded patch cableFeatures: Fully conforms to ANSI/TIA-568-C Made to...

Connectix Tool-less Keystone Modules ensure a quick and easy to terminate installation. The snap-fit to terminate design means that a punch down tool is not required. They have been designed to be installed into most UK and European Keystone applications, including standard or angled faceplate products, patch panels or surface boxes. The loading...

Category 6 unshielded twisted pair cable is designed for use in next generation data communications networks, and will comfortably support all present applications including 2.5Gbp-5Gbp Ethernet.  Connectix Category 6 U/UTP Solid Cable offers the performance characteristics required by the ever present Category 6 Standard. When used in...

The Connectix 2020 Series Patch Panel is an alternative to the Category 6 High Density Panel. It offers the same Category 6 performance as the standard panel but has been designed to present the cable termination IDCs horizontally on a tray at the rear , making termination and cable management easier. Category 6 High Density 24 way panels...

Self laminating wrap around cable labels are designed to wrap around cable. Specially designed for synthetic face materials, with excellent clarity, UV stability, good water resistance, good adhesion & heat resistance. 49 Labels per Sheet 21 Sheets per Box Sheet size A4 Labels are supplied blankClick Here to download the label printing...