List of products by manufacturer Connectix Cabling Systems

Cat6 RJ45 Patch Leads Made to Your Specification

Using our in-house cable assembly facility, we are able to manufacture virtually any type of Cat6 UTP RJ45 Patch Leads to your exact specification. Each RJ45 lead is individually tested to ensure quality and performance. All leads are made with high quality 100% copper stranded patch cableFeatures: Fully conforms to ANSI/TIA-568-C Made to order in any length Each lead is individually QA tested Plugs conform to ISO8877 Minimum order quantity of 10 leads   || Please select the options on the right to build the lead you require. Please note... More Info

Cat6a RJ45 Patch Leads Made to Your Specification

Connectix Cat6A SFTP RJ45 Patch Leads are designed to complete the Cat6A Channel, providing support for extremely high-speed applications including 10GBASE-T. The Patch Leads are made from shielded Cat6A cable and are terminated using high performance modular plugs. The fully shielded cable increases signal isolation and helps to prevent contaminant noise from entering the lead. These SFTP patch leads are complementary to the Connectix Cat6A Cabling System and will provide support for future bandwidth-hungry applications. More Info

Internal Multicore CW1308 Telephone Cable - Available from 3 Pair to 100 Pair

CW1308 telephone cables are suitable for the internal connection of telephone systems and other communications equipment. The cables are insulated and sheathed in PVC, making them an extremely cost effective general signal cable for fixed installation. The standard sheath colour is white. Various pairs of CW1308 cable include a 1.38mm earth core. Priced per metre and cut to length. Feaures: Conforms to BT Specification Available with 3, 4, 10, 20, 25, 50, 100 pairs More Info

DDA Compliant double gang faceplate to take up to 4 Euro Modules

Grey faceplate Ideal for installations that requires a high contrast between the mounting surface and the outlet (as specified in the Disibility Discrimination Act) More Info

Metal Faceplates pre-loaded 4 Cat6 UTP Modules available in 7 finishes

Doublegang metal faceplate loaded with four cat6 modules Fit perfectly onto standard size double gang back boxes Ideal for installing into situations where matching the surrounding décor is important.Module DetailsCategory 6 modules provide the performance needed for present and next generation data communications networks and applications, including Gigabit Ethernet. The use of next generation components and specially designed boards allow a bandwidth of 250MHz to be achieved. Connectix Category 6 Modules are fully compliant with... More Info

The Connectix Cabling System Double gang Office style faceplates are industry standard size and are compatible with all euro style modules. The rounded edges and raised surface give these faceplates a nicely styled finish. Each faceplate is supplied with fixing screws and compatible with Connectix Cabling system euro style modules, Keystone Fascia, ½ Blank  and 1/4 blanks.Ideal for use with our DualGang Office Backbox Part number 008-010-002-30 More Info

Connectix Cabling System Office Style Faceplates with its rounded corners fit Perfectly into this surface mount backbox. Uncluttered internal design Tough Shatter Resistant PVC Also available in SinglegangFor use with Office style faceplate Part Number: 008-001-003-62 More Info

Dryline back boxes for flush mounting - Available in Single or Double Gang

Dryline backboxes for flush mounting in plasterboard cavity walls, Suitable for use with modular face plates More Info

RJ45 Crimp Tool, for use with Easy RJ45 UTP & FTP Pass through Plugs

The 'Easy' RJ45 Crimp tool works perfectly with the 'Easy' Cat6 UTP & FTP Pass Through Plugs.With its added cutting function, this crimp tool trims off the excess wires as it crimps the RJ45 plug.- For use with RJ45 Pass through plugs- Can be used to cut outersheath of cableSee below for the 4 step 'Easy' Instructions 1 Remove approximately 20mm of outer jacket using the multi-purpose crimp tool.2 Arrange wires into the correct colour code sequence (most commonly EIA/TIA 568B). Slot cable into the plug pushing the wires through. Outer... More Info

Steel Wire Armoured Cat5e Solid Core Cable Suitable for Direct Burial

Connectix armoured external Enhanced Category 5 UTP Cable is designed for external use and direct burial. Cable is cut to length and must has a minimum order quantity of 20mt. When used with Connectix Enhanced Category 5 panels and modules it gives the exceptional performance required for transmission over all four pairs. Armoured Cat5e Cable Details: Features: Suitable for Gigabit Ethernet applications HDPE outer sheath Galvanised steel wired armour Pure copper cores Excellent performance exceeding ANSI/TIA Enhanced Category 5 specifications More Info

Steel Wire Armoured Cat6 Solid Core Cable Suitable for Direct Burial

Connectix armoured external Cat6 UTP Cable is designed for external use. The cable is armoured with Steel Wire making it rodent proof and ideal for direct burial. When used with Connectix Cat6 patch panels and modules it gives the exceptional performance required for transmission over all four pairs. External Cat6 Armoured Cable Details: Features: Suitable for Gigabit Ethernet applications HDPE outer sheath Galvanised steel wired armour Pure copper cores Excellent performance exceeding ANSI/TIA Cat5e specifications 30m minimum length PLEASE... More Info

Cat5e Leads Made from LDPE Cat5e Solid Cable for External Use

RJ45 Patch leads made from LDPE cable which are suitable for external use are available in lengths from 10mt to 75mt. Designed to run externally, these patch leads are ideal for using to link outbuildings. These RJ45 leads are made to order using high quality Cat5e connectors and black solid LDPE Cat5e UTP Cable. Each patch cable is individually tested and bagged to ensure quality and performance. Features: Fully conforms to ANSI/TIA-568-C Each lead is individually bagged & QA tested  Plugs conform to ISO8877 More Info